Grid Tie/Off-Grid 10000W Split-Phase Solar Inverter 48V to 120V/240V, UL1741 Solar Hybrid Inverter 10KW Built-in WiFi and 200A MPPT Controller, Up to 6 Unit in Parallel, Support Batteryless Run

【Hybrid Solar Inverter】This split-phase solar inverter seamlessly integrates on-grid and off-grid capabilities, harnessing power from PV solar modules, batteries, and the utility to provide continuous electricity to connected loads. It can both feed the grid (utility) and charge batteries, optimizing power generation based on varying conditions.
【Technical Specification】Hybrid Inverter built-in dual 100A MPPT controller and 10KW Pure sine wave inverter. Supports two sets of solar panel array inputs and simultaneously tracks the maximum power charging/carrying capacity of two solar energy sources. With a rated output power of 10000W (surge 20000W) and compatibility with various voltage outputs (120/208/240Vac), it ensures reliable performance. Max.PV Input Power: 12KW(6000*2), Max.PV input Voltage: 600Vdc, Max.PV input current: 2 x 18A (MAX 30A), PV Starting voltage ≥150V, PV Wire Size:10AWG. Max. Battery Charging Current：200A
【Compatible with Various Batteries】10000W split-phase solar inverter 48V is compatible with Lead-acid (Seal, AGM, Gel, Flooded) and Lithium batteries, and supports batteryless. Supports solar, utility, or generator power to charge the battery. It can flexibly schedule the Inverter charging and discharging time. With a dual activation function when the Li-ion battery is dormant; either mains / photovoltaic power supply access can trigger the activation of the Li-ion battery.
【Three Operation Modes and Priority be Set】This 10KW Power Inverter Charger has three operation modes: Grid-tie with backup, Off Grid, and Grid Tie. PV power can feed back to the grid, provide power to the load, and charge the battery. Four options are available in this mode: Grid-tie with backup I, II, III, and IV. In this mode, users can configure PV power supply priority, charging source priority, and load supply source priority.
【Certified Safety and Reliability】This 10K solar inverter is UL1741 and IEEE1547 certified, offering complete protection features such as short circuit, over-current, over-under voltage, overload, and backfill protection. Its ETL certification ensures compliance with industry standards, providing peace of mind for users while saving on electric bills and preparing for power outages. Widely applicable for residential and recreational settings, it serves as a reliable backup power supply during utility outages.
【Only need 1 10k inverter can output 120V/240V】Split-phase Solar Inverter 48V support split-phase and single-phase pure sine wave output. Support parallel operation for capacity expansion up to 60kW, max 6 power inverter parallel
【Widely Used】The hybrid inverter is ideal for grid on and off-grid backup and self-use applications. Widely used for home, cabin, camper, RV, trailer, boat, and so on and used as backup supply while utility outages.